BOSOKO Pinch Tab Wiper Blades

To remove Bosoko pinch tab wiper blades, begin by lifting the wiper arm away from the windshield, taking care as it may be spring-loaded. Protect the windshield by placing a towel underneath the wiper arm. Locate the release mechanism on the Bosoko blade, typically near the connection point between the blade and the wiper arm adapter. Two common types include a pinch tab or a release button. For a pinch tab, squeeze it while pulling the blade down and away from the wiper arm. If there's a release button, press it to disengage the locking mechanism. While holding the release mechanism depressed, firmly pull the wiper blade down and away from the wiper arm. Use gentle force, avoiding jerking or twisting motions. Repeat the process for the other blade.

To install Bosoko pinch tab wiper blades, gather your tools: new pinch tab blades and a towel to protect the windshield. Lift the wiper arm away from the windshield, taking care as it may be spring-loaded. Place the towel under the arm to prevent scratches if it snaps back. Locate the release mechanism on the old blade and remove it by pressing the tab or button and pulling it straight down and away from the arm. If your new blades require adapter replacement, refer to the instructions. Identify the correct adapter for your vehicle and attach it to the blade. Align the tabs on the adapter with the slots on the wiper arm and push the blade firmly until it clicks. Lower the arm back onto the windshield and repeat for the other blade. Remove any protective sheath and test the blades for smooth, streak-free operation with washer fluid.